RP-2001
RP-2001 is a UL listed six-zone fire alarm control panel for single and dual hazard deluge and preaction applications, providing fire detection, signaling and protection for commercial, industrial and institutional buildings requiring water-based releasing.!
Features & Benefits:
- Designed for sprinkler standards NFPA 13, 15 and 16.
- Dual hazard operation.
- Cross-zone (double-interlock) capability.
- Six programmable Style B (Class B) IDCs (Initiating Device Circuit).
- Optional Digital Alarm Communicators
SFP-2402, SFP-2404
The SFP-2402 and SFP-2404 are UL Edition listed conventional fire alarm control panels with two alarm initiating zones and four initiating zones respectively. The Notification Appliance Circuit (NAC) protocol can silence audible devices while strobes continue to flash, using a single pair of wires.
Features & Benefits:
- Compatible with conventional input devices such as two- and four-wire smoke detectors, pull stations, waterflow devices, tamper switches and other normally-open contact devices
- 2-zone: 2 Class B/Style B zones; 1 Class B/Style Y NAC
- 4-zone: 4 Class By/Style B zones (Class A/Style D optional); 2 Class B/Style Z (Class A/Style Z optional)
- 3 Amps (expandable to 6.0 AMPS on 4-zone) with programmable strobe synchronization
SFP-10UD
The SFP-10UD, SFP-10UDR (Red backbox), are a UL listed, 10-zone fire alarm control panel with a built-in digital alarm communicator transmitter (DACT) and remote site upload/download capability.
Features & Benefits:
- Ten Class B Initiating Device Circuits (IDCs), Class A optional with N-CAC-5X converter module (2 required)
- Four Class B NACs rated at 3.0 amps, Class A optional with N-CAC-5X converter module (2 required)
- 7.0 amps total system power
- Up to eight ANN-BUS devices (such as LCD annunciators)
- Serial or parallel printer interface
- 80-character LCD display
SFP-5UD
The SFP-5UD and SFP-5UDR (red backbox) is a UL listed, 5-zone fire alarm control panel with a built-in digital alarm communicator transmitter (DACT) and remote site upload/download capability.
Features & Benefits:
- Five Class B Initiating Device Circuits (IDCs), Class A optional with N-CAC-5X converter module
- Four Class B NACs rated at 2.5 amps, Class A optional with N-CAC-5X converter module
- 3.0 amps total system power
- Up to eight ANN-BUS devices (such as LCD annunciators)
- Serial or parallel printer interface
- 80-character LCD display
- Optional IP Communicator
RP-2002
RP-2002 is a UL listed six-zone fire alarm control panel for single and dual hazard agent releasing applications, providing fire detection, signaling and protection for commercial, industrial and institutional buildings requiring agent-based releasing.
Features & Benefits:
- Disable/Enable control per input zone and output zone.
- Extensive transient protection.
- Dual hazard operation
- Meets International Building Code (IBC) seismic requirements
NFS-320
The NFS-320 and NFS-320R (Same as NFS-320 but in red enclosure) intelligent fire alarm control panels are part of NOTIFIER’s UL listed ONYX Series. It’s designed specifically for small applications with features that minimize installation time, enable faster response times, and simplify maintenance and usability.
Features & Benefits:
- Fully field programmable
- Removable chassis design for easy installation and service
- Direct connect to NOTIFIER FirstCommand™ Emergency Communications System
- Networkable with NOTI-FIRE-NET and ONYXWorks compatible up to 200 nodes for NFN
- Optional IP or GSM Communicator
- Listings: Releasing, Mass Notification, Seismic Certified, Marine Approved
NFS-320SYS
The NFS-320SYS intelligent Fire Alarm Control Panel is part of the ONYX® Series of Fire Alarm Controls from NOTIFIER. The panel can be configured with just a few devices for small building applications, or networked with many devices to protect a large campus or a high-rise office block.
Features & Benefits:
- High-speed network for up to 200 nodes
- Standard network for up to 103 nodes
- Autoprogramming and Walk Test reports
- Multiple central station communication options
- Listings: Seismic Certified, Marine Approved
NFS2-640
The NFS2-640 is engineered for mid-size applications, designed to maximize flexibility and customization that meet your specific life safety needs.
The NFS2-640 intelligent fire alarm control panel is part of NOTIFIER’s UL listed ONYX Series. It’s designed specifically for mid-size applications, and easily expanded via NOTIFIER’s intelligent fire alarm network.
Features & Benefits:
- ONYX Intelligent Sensing – nine levels of sensitivity, drive compensation and maintenance alert, and auto detector test
- Fully field programmable with 80-character display
- Optional Integrated Digital Voice Command with eight channels of standard quality audio or one channel of high quality audio and firefighter telephone on a single cable
- Listings: Releasing, Mass Notification, Seismic Certified, Marine Approved
NFS2-3030
The NFS2-3030 is the complete solution for large scale applications requiring superior performance.
The NFS2-3030 intelligent fire alarm control panel is part of NOTIFIER’s UL listed ONYX Series. The NFS2-3030 supports over 3,000 intelligent devices on ten Signaling Line Circuits, perfect for protecting large scale applications.
Features and Benefits:
- Large 640-character LCD backlit display or displayless
- Networkable with NOTI-FIRE-NET and ONYXWorks compatible up to 200 nodes for NFN
- Built-in degraded mode option
- Optional integrated Digital Voice Command (DVC)
- EIA-485 annunicators, including custom graphics
- FM6320 approved gas detection system
- Listings: Releasing, Mass Notification, Seismic Certified, Marine Approved